USER’S MANUALModel No. NTEL71315.3Serial No. Write the serial number in the space above for reference.nordictrack.com
10611311478Avoid pinching the wires6. Tip: Avoid pinching the wires. Insert the Console Bracket (3) into the Frame (2). Attach the Console Bracket wi
119101110. Make sure that all parts are properly tightened. Place a mat beneath the elliptical to protect the floor. Note: Extra parts may be included
12HOW TO PLUG IN THE POWER ADAPTERIMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room tem-perature before you
13HOW TO EXERCISE ON THE ELLIPTICALTo mount the elliptical, hold the handlebars (C) and step onto the pedal (D) that is in the lower position. Then, s
14SodiumELNT71315NTEL71315CONSOLE DIAGRAMFEATURES OF THE CONSOLEIMPORTANT: To activate your console and begin using its exclusive features, see assemb
15HOW TO USE THE MANUAL MODE1. Turn on the console. Begin pedaling or press any button on the console to turn on the console. When you turn on
16 As you exercise, the workout intensity level bar will indicate the approximate intensity level of your exercise. To pause the console, press t
17HOW TO USE AN ONBOARD WORKOUT1. Turn on the console. Begin pedaling or press any button on the console to turn on the console. When you turn
184. Follow your progress with the display. See step 4 on page 15.5. Wear a heart rate monitor and measure your heart rate if desired. See ste
19HOW TO CONNECT YOUR TABLET TO THE CONSOLEThe console supports BLUETOOTH connections to tablets via the iFit Bluetooth Tablet app and to compat-ible
2TABLE OF CONTENTSWARNING DECAL PLACEMENTThis drawing shows the location(s) of the warning decal(s). If a decal is missing or illegible, see the front
20HOW TO CHANGE CONSOLE SETTINGS1. Select the settings mode. To select the settings mode, press the Settings button. The settings information will
21MAINTENANCE AND TROUBLESHOOTINGMAINTENANCERegular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten
22HOW TO ADJUST THE REED SWITCHIf the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first
23These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician.
24 1 1 Base 2 1 Frame 3 1 Console Bracket 4 1 Console 5 1 Right Leg 6 1 Left Leg 7 1 Right Upper Body Arm 8 1 Left Upper Body Arm
25 101 1 Idler 102 1 M4 x 10mm Ground Screw 103 1 Power Adapter 104 2 M4 x 10mm Clamp Screw 105 2 M8 x 68mm Screw 106 6 M10 Locknut
26EXPLODED DRAWING A1023029452026282522279898989898981009898989714161517383798989898989898989898989797979797979748202321254424989898989898989898975710
27EXPLODED DRAWING B6810119491313343359606192926811667697072717473869788879098988276474680818165657777798079111110641298981257343633358889934398988210
Part No. 397563 R1217A Printed in China © 2017 ICON Health & Fitness, Inc.To order replacement parts, please see the front cover of this manual.
3 WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical
4 all STANDARD SERVICE PLANS
5Thank you for selecting the revolutionary NORDICTRACK® FREESTRIDE TRAINER FS5I elliptical. The FREESTRIDE TRAINER FS5I elliptical provides an impress
6PART IDENTIFICATION CHARTUse the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the
7• Assembly requires two persons.• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until
83. See the upper drawing. Identify the Left Pedal Arm (9) and orient it as shown. Using a plastic bag to keep your fingers clean, apply a generous a
94. Identify the Strap (64) on the Right Pedal Arm (94). Route the Strap under the Roller (67); make sure that the Strap is not twisted. Make sure
Kommentare zu diesen Handbüchern